In the production of wood pellet, wood chipper machine plays the role of processing, because in the process of making wood pellet, the size of wood pellet machine is required to be 6-8mm, but the feed size of wood hammer mill is required to be 3-5cm, so it is necessary to processing wood chipper machine. The waste wood is broken into 3-5cm wood chips and then into the wood chipper machine. The advantages of the currently popular AN216 wood chipper machine are as follows:

First: Wood chipper machine power consumption is small. The main motor of AN216 wood chipper machine is 55kw, the feed motor is 3kw, the discharge motor is 5.5kw, and the hydraulic pump is 0.55kw. The working efficiency is 85%, and the power consumption per hour is about 54.4 KWH.
Second: The wood chipper machine runs stably. The wearing part of the general machine is the bearing, but the bearing life of the wood chipper machine is 6 months to 12 months. Because the speed of the wood chipper machine is 800 revolutions per minute, the rotor is connected to the motor by a belt. The life of the bearing of the wood chipper machine will be longer than that of other crushing.
Third: Wood chipper machine maintenance is simple. Daily injection of high temperature resistant grease into 4 bearings of the wood chipper machine. And check the blade wear every month. If the wear is serious, the knife sharpener is used for grinding first, and the blade can be replaced after polishing twice.