The maintenance cycle of the wood pellet mill machine varies depending on the equipment model, frequency of use, working environment and other factors. The following is a rough maintenance cycle reference:

1.‌ Routine maintenance:
After work every day, clean the dust and debris on the surface of the equipment to keep the equipment clean; Check whether the connection bolts in each part are loose and tighten them in time; Check the lubrication of the equipment and ensure that the lubrication points are fully lubricated; Observe the operating status of the device and check for abnormal noise, vibration, or heat.
The wood pellet mill machine should be thoroughly cleaned once a week, including the removal of internal dust and residue; Check the tension of the belt or chain of the transmission device, and adjust it in time; At the same time, check that the electrical system is properly connected to ensure that there is no leakage.
2.‌ Regular maintenance:
Check the wear of the roller and the mold every month, and replace it in time when the wear is serious; Check whether the seal of the equipment is intact, and replace it in time if it is damaged; In addition, a complete inspection and maintenance of the lubrication system of the equipment should be carried out, including the replacement of lubricating oil ‌1.
A comprehensive overhaul of the equipment is required every three months, which includes checking the wear of various parts, adjusting the clearance and replacing the wearing parts; At the same time, should also check the operation of the motor, if abnormal should be timely maintenance or replacement.
Every 6 months should be a comprehensive maintenance of the equipment, covering cleaning, lubrication, adjustment, fastening and other aspects; In addition, the control system of the equipment should be checked to ensure its normal operation.
Following the above maintenance cycles and recommendations can ensure the stable operation of the wood pellet machine and extend its service life. At the same time, attention should also be paid to flexibly adjust the maintenance cycle and content according to the actual situation of the equipment and the use environment.