This news provides a comprehensive guide to troubleshooting common issues with Single rotary drum dryer machines. You will learn how to identify the source of problems and implement solutions to ensure optimal machine performance.
Troubleshooting: Identifying Common Issues
Material handling problems: Bridging, channeling, and inconsistent feeding
Drying efficiency issues: Low evaporation rates and product moisture content issues
Mechanical breakdowns: Bearing failure, seal leaks, and motor issues

1.Slow roller speed: may be due to excessive motor load or slack belt caused. The solution is to check whether the motor load is too large and reduce the load appropriately; At the same time check the belt tension, such as slack can be properly adjusted‌
‌2.Cylinder abnormal sound ‌ : may be due to cylinder bearing damage or accumulation of debris inside the cylinder caused. The solution is to check whether the roller bearing is damaged, such as damage can be replaced in time; At the same time, clean the debris inside the drum‌
‌3.Hot blast stove does not work: it may be caused by power failure or burner failure. The solution is to check whether the power supply is normal, such as abnormal can be repaired in time; At the same time check whether the burner is normal, if there is a fault can be repaired or replaced‌
‌4.Temperature instability: may be caused by a fault in the temperature controller or sensor. The solution is to check whether the temperature controller and sensor are working properly. If they are faulty, repair or replace them‌
‌5.Electrical system failure: may be due to loose wiring or a blown fuse. The solution is to check whether the wiring is firm, such as loose can be re-fixed; At the same time, check whether the fuse is blown. If the fuse is blown, replace it