The production cycle of wood sawdust rotary drum dryer is generally 20-30 working days, the production process is more complex, the following is the production steps of wood sawdust rotary drum dryer.

Step First: Confirmation of the model of the wood sawdust rotary drum dryer. The model of the wood sawdust rotary drum dryer is confirmed according to the evaporation amount of the material, and different evaporation amounts correspond to different models of wood sawdust rotary drum dryer. Each cubic volume inside the dryer can evaporate up to 30kg of water. The internal evaporation volume of the wood chip dryer is 2πr2H (r represents the radius of the dryer, H represents the length of the dryer).
Step Second: the selection of wood sawdust rotary drum dryer material. According to different models, the thickness of the drum is also different, generally more than 2 meters in diameter, and the thickness of the drum is 14mm seamless threaded pipe. The motor power of the drum is configured according to the moisture content of the material and the weight of the dryer.
Step Third: wood sawdust rotary drum dryer main body welding. In the production process of wood sawdust rotary drum dryer, it is mainly completed by welding process. The drum adopts seamless threaded pipe, the feed cover and discharge cover of the dryer, and the lifting plate and guide plate inside the dryer are also welded to the drum.
Step Fourth: The circular test of the wood sawdust rotary drum dryer before leaving the factory. After the main structure and auxiliary equipment of the wood sawdust rotary drum dryer are completed, it is necessary to carry out trial operation and rotation on the flat ground to ensure that the dryer rotates in a circular state. In this way, there is no risk of rocking the roller and rolling off. Ensure stable operation at the customer site.