Biomass fuel pellet machine is a kind of equipment for processing biomass fuel particles. There are a few users in the use of this equipment, do not pay attention to the problem of raw materials, resulting in equipment in the process of use, often failure, thus affecting the service life of the equipment. So what are the requirements of biomass fuel pellet machine for raw materials? The following is the related content of Shandong ANNAS machinery.

1.Raw materials can not be too wet
Some users in the processing, the raw material is too wet and ignore, directly into the biomass fuel pellet machine for processing. In fact, the equipment has certain requirements for the degree of drying and wetting of raw materials. Although the equipment has the function of drying raw materials. However, if the raw material is too wet, it will have a certain impact on the parts of the equipment. Because of the processing position inside the equipment, there is no rust prevention layer, and too wet raw materials will easily lead to metal rust. Especially in the case of not using the equipment for a long time, rust is more obvious.

2.To screen the raw materials
Materials are sometimes mixed with metals or stones during collection. If the user does not screen the material, the material will enter the inside of the equipment for processing. These hard substances will affect the parts of the equipment, and seriously cause the collapse of the processed parts. So before using raw materials, users must be screened to screen out those excellent substances.

3.can not contain strong corrosion and high ignition point of the material
During the collection of raw materials, it is possible that raw materials may be mixed with highly corrosive and high ignition point substances. Highly corrosive substances corrode the components of the device and cause rust. The material with too high ignition point can easily cause the combustion of raw materials in the production process.

4.The placement of raw materials should be convenient for production
The placement of raw materials in the production process has a certain impact on the production efficiency. For example, the placement position affects the raw materials to be put into the equipment, and the raw materials are piled up too disorderly. These seemingly insignificant factors will affect the normal use of the equipment. After the above introduction, it can be seen that the requirements of biomass fuel pellet machine for raw materials include: raw materials can not be too wet, to screen the raw materials, can not contain strong corrosive and high ignition point of the material, the placement of raw materials to facilitate production.