The wood pellet machine reducer is one of the core components of the wood pellet machine. The motor used by the wood pellet machine is a 4-stage motor, the speed is 1470 revolutions per minute, the wood pellet machine reducer is composed of 4 disk gears, and the speed of the wood pellet machine reaches 80-90 revolutions per minute after the deceleration of the reducer. Therefore, the stable operation of the reducer is particularly important. The following describes the maintenance plan of the wood pellet machine reducer:

Step 1: The first replacement of wood pellet machine reducer gear oil is 300 working hours.
Step 2: Replace the gear oil of the wood pellet machine reducer after every 1000 working hours.
Step 3: Open the observation hole port of the reducer of the wood pellet machine regularly every month to check the wear of the gear. If there is a gear with serious wear, contact the manufacturer to replace it in time.
Step 4: Clean the circulating oil pump filter of the reducer of the wood pellet machine every week.
Step 5: The cooling of the wood pellet machine reducer adopts the method of air cooling, and configure different cooling fans according to the size of different reducer models, and check the blades and rotating bearings of the cooling fans every week.