The reducer is one of the core components of the wood pellet machine, so we must pay attention to the maintenance and maintenance of this part. The wood pellet machine usually uses a four-stage motor, the motor speed is 1480 RPM, through the speed ratio of 18.5 reducer, the speed of the wood pellet machine reached 80 RPM.
The life of the reducer is 7-10 years, but the following maintenance plan must be done.

First: the reducer of the wood pellet machine needs to replace the gear oil regularly. The first replacement of the gear oil of the wood pellet machine reducer is 300 hours, followed by the replacement of the gear oil every 1000 hours of operation. The choice of gear oil is LCK320 model under normal temperature environment. If it is in the Russian region or low temperature region, the gear oil model of the wood pellet machine reducer is LCK220 model.
Second: the filter of the reducer of the wood pellet machine needs to be cleaned every 5 days. Because the gear will wear when it is rotating, this is normal. However, the worn iron filings need to be filtered out, otherwise they will wear other gears.
Third: The operation of wood pellet machine the reducer needs to maintain stable input and output power stability, reduce unnecessary start-up emergency shutdown, and reduce gear wear.