Biomass pellet machine equipment and other equipment are the same, need regular maintenance and maintenance in order to extend his service life and maintain good working condition. The following to share with you the maintenance plan of biomass pellet machine:
1. About the gear oil of the reducer of biomass pellet machine, the first replacement is 300 working hours after the boot. It will be replaced every 1000 working hours.
2. For the biomass pellet machine ring die, replace the new ring die every 800-1000 working hours.
3. For the biomass pellet machine press roller, replace the new press roller every 300-500 working hours.
4. For the biomass pellet press roller bearing, check the wear of the bearing every month, and replace the new bearing in time.
5. About the automatic injection grease oil pump of the biomass pellet machine, it is necessary to remove the injection pipe to the machine to ensure normal grease  oil output before starting the machine every day, and then connect to the machine. If there is a problem with the automatic injection grease  oil pump, it will cause damage to the large shaft bearing and the press roller bearing of the biomass pellet machine.
6. About the working environment of the biomass pellet machine, the machine should be used in a dry and clean room, and should not be used in places where the atmosphere contains acids and other corrosive gases to the body
7. Check the compression chamber components of the biomass pellet machine regularly every month, such as pressure plate, slewing support, pressure block, dial plate, etc. If the time is long, the whole body of the machine must be wiped clean, the smooth surface of the machine parts coated with anti-rust oil, and covered with cloth.
In short, every pellet spare part is important, and good maintenance habits are essential for the machine to have higher production efficiency and longer service life.